INA bearings for lubrication performance can be divided into the following areas:

 

1, first lubricate the various parts of INA bearings, [INA bearings] reduce friction and wear;

2, so that the rolling contact surface of INA bearings suitable for film formation often extend the fatigue life of INA bearings;

3, taken away by the lubricant within the bearing INA or other reasons due to friction heat generated;

4, by INA Bearing lubrication can be reached on the role of rust and dust;

 

INA bearings of the two main lubrication grease and oil lubrication:

grease in sealed bearings are pre-filled grease in the seal, as well as filling in the amount of grease inside the housing, from time to time supplement or replacement for grease filling method. In addition, there are many mechanical bearings need lubrication, but also the use of pipe connected to a centralized office for the lubrication grease way. Grease lubrication can be achieved after filling a long time without added grease, and its sealing device structure is relatively simple, so widely used. Oil lubrication is relatively simple.

 

Pack the joint along with oil, utilizing a cloth in order to wipe aside the actual grease from the combined housing once it’s put together again. The kind ina bearings of combined housing might be a number of plumbing or even tubes screwed together or perhaps a trunk which closes the grease in to the joint. Turn the combined so that the oil is flattened.

 

Some bearings, such as skateboard bearings might have colored sides, which show which side of the ballbearings should face the inside or outside from the joint. Make sure that you are utilizing the right kind of ballbearings. For instance, bicycles make use bearings online of 3 different types of bearings for their modems, depending on the bicycles producer as well as design